Precisa Series XT Operating Instructions Manual Download Page 38

Page: 38 / 90

■

5 Working with the Configuration menu

5.6

Calibration functions

To activate the menu see Chapter 4.4 “Activating the two main me-

nus” and Chapter 4.5 “How the menu control operates”.

For the calibration of the balance see Chapter 3.7 “Calibration of the

balance” and Chapter 14.2 “Notes on calibration”.
The works setting depends on the model of balance.

• SET CALI-

BRATION

MODE OFF

Closed

MODE EXTERNAL

External

MODE EXT-DEF.

External with user-defi-

ned weight (DEF n.nnn g)

MODE

INTERNAL

with internal weight

MODE AUTO

Automatic (AUTOCAL)

DEF.

0.000

Calibration weight for

EXT.-DEF. mode

AUTOCAL.

TIME

AUTOCAL.

TIME/TEMP.

AUTOCAL.TEMPERATURE

Autocalibration on time

Autocal. on time and tem-

perature

Autocal. on temperature

AUTOCAL.-TIME

6 h

Time for Autocalibration

Summary of Contents for Series XT



























































































Search results

Summary of Contents for Series XT

Reviews:

Related manuals for Series XT

Brands by name

Popular brands

Precisa Series XT, Operating Instructions Manual

Search results

Summary of Contents for Series XT

Reviews:

Related manuals for Series XT

Brands by name

Popular brands