· Screen Orientation
The laser distance measurer rotates the screen between 0-degree and
90-degree. Find the icon in the setting, tap to turn on or off auto
rotation. Tap or to leave.
· Measurement Reference
1. There are two reference positions. One is the front of the laser distance
meter, and the other is the rear of the device.
2. Tap to select the proper position.
· Bluetooth
With the built-in Bluetooth can connect to the APP. You can easily store, manage
measurements on images, and send to others wireless, such as email, instant
messaging, and all the applications you used to.
1. Tap and hold for 2 seconds to enter Bluetooth screen.
2. Tap to turn on or off the Bluetooth.
3. Install the MeasureCAM on the phone. The APP supports both iOS and
Android.
4. Please find more information on
http://www.precaster.com.tw/im2
5. Scan the QR codes below for direct access to the APPs.
2. Find the icon in the setting inside the application menu, tap or to
select the preferred unit and press to complete the setup.
5
8
9
10
6
7
Error Code
1. This laser distance meter has a Class 2 laser inside, laser radiation is emitted
from this product and is manufactured to comply with IEC 60825-1: 2007, EN
60825-1:2007, EN 61326-1:2013 and CRF21, parts 1040.10 and 1040.11.
2. The product complies with EMC Test according to EN 61000-6-3:2001+A11:2004,
EN 61000-6-1:2001, EN 61326-1:2013, IEC 61326:2012 and FCC Test according to
PART 15.
3. Use of controls, adjustment procedures other than those specified herein may
result in laser radiation exposure.
4. Never stare directly into the beam or aim the laser beams at others.
5. The product contains semiconductor laser diodes with wavelengths of 650
nanometers.
6. The total continuous output of the beams never exceeds 1.0 milli-watts.
Safety Information
· Indirectly Height Measurement Mode
Indirectly Height Measurement Mode has six types in this mode and is based on
Pythagorean. Refer to Wikipedia regarding Pythagorean theorem.
(https://zh.wikipedia.org/zh-tw/)
Indirectly Height Measurement 1
1. Find the icon in the application menu by tap or , to enable the
Indirectly Height Measurement mode, press .
2. Find the icon to enable the Indirectly Height Measurement Mode 1 which
measures the height of the triangle
3. Follow the instructions on the screen and measure the length of the
hypotenuse and length of the base. The height shows on the screen with the
length of the hypotenuse and base.
4. Tap to return to the previous step.
5. Tap to leave the mode.
Indirectly Height Measurement 2
1. Find the icon in the application menu by tap or , to enable the
Indirectly Height Measurement mode, press .
2. Find the icon to enable the Indirectly Height Measurement Mode 2, which
measures the height summary of the two triangles with the same base.
3. Follow the instructions on the screen and measure the two lengths of the
hypotenuse and length of the base. The height summary shows on the screen
with the length of the hypotenuse and base.
4. Tap to return to the previous step.
5. Tap to leave the mode.
Indirectly Height Measurement 3
1. Find the icon in the application menu by tap or , to enable the
Indirectly Height Measurement mode, press .
2. Find the icon to enable the Indirectly Height Measurement Mode 3, which
measures the height difference of the two triangles with the same base.
3. Follow the instructions on the screen and measure the two lengths of the
hypotenuse and length of the base. The height shows on the screen with the
length of the hypotenuse and base.
4. Tap to return to the previous step.
5. Tap to leave the mode.
Indirectly Height Measurement 4
1. Find the icon in the application menu by tap or , to enable the
Indirectly Height Measurement mode, press .
2. Find the icon to enable the Indirectly Height Measurement Mode 4, which
measures the height of the triangle with angle.
3. Follow the instructions on the screen and measure the length of the
hypotenuse. The height shows on the screen with the length of the
hypotenuse and angle.
4. Tap to return to the previous step.
5. Tap to leave the mode.
Indirectly Height Measurement 5
1. Find the icon in the application menu by tap or , to enable the
Indirectly Height Measurement mode, press .
2. Find the icon to enable the Indirectly Height Measurement Mode 5, which
measures the height summary of the two triangles with the same base but
calculate by angles.
3. Follow the instructions on the screen and measure the two lengths of the
hypotenuse. The height shows on the screen with the two lengths of the
hypotenuse and angle.
4. Tap to return to the previous step.
5. Tap to leave the mode.
Indirectly Height Measurement 6
1. Find the icon in the application menu by tap or , to enable the
Indirectly Height Measurement mode, press .
2. Find the icon to enable the Indirectly Height Measurement Mode 6, which
measures the height difference of the two triangles with the same base but
calculate by angles.
3. Follow the instructions on the screen and measure the two lengths of the
hypotenuse. The height shows on the screen with the length difference of the
hypotenuse and angle.
4. Tap to return to the previous step.
5. Tap to leave the mode.
NEW BENCHMARK OF MEASURING
NEW BENCHMARK OF MEASURING
NEW BENCHMARK OF MEASURING
www.precaster.com.tw
LDM60C
OPERATION MANUAL
· Digital Level
1. With the built-in accelerometer, turns the laser distance meter into a
360-degree digital level.
2. Find the icon in the application menu by tap or , to enable the
Digital Level mode, press .
3. The level sensor work in the same direction of the laser.
4. Tap to hold the angle reading.
5. Tap or to leave Digital level mode.
www.precaster.com.tw
LDM60C
OPERATION MANUAL
www.precaster.com.tw
LDM60C
OPERATION MANUAL
· Calibrate the Digital Level
1. You can always re-calibration the accelerometer before use.
2. Find the calibration function in the setting menu with icon.
3. Tap to start the procedure.
4. Follow the on-screen images and place the laser distance meter on the
correct position.
5. Tap to activate the calibration in this direction.
6. It has four steps to complete the calibration.
7. When finished, it leaves the calibration automatically.
· Unit Setting
1. There are 8 units in the laser distance meter, refer the units table below for
details of the 8 units.
· 50 Measurement Records
1. The laser distance measurer has 50 memories, and it automatically saves
every step during the measuring. You can always go back and see the
measurements you made.
2. Find the icon in the setting inside the application menu, tap or to
look for the measurements you need.
3. Tap or to leave.
meter
Length
Area
Volume
m
m²
m³
ft
ft²
ft³
in
ft²
ft³
0’0”1/32
ft²
ft³
1/32in
ft²
ft³
1/16in
ft²
ft³
1/8in
ft²
ft³
10/33
P
m³
feet inch
inch
inch
inch
尺
0’0”1/32
· Buzzer Volume
1. There are three sound volume, low, mid, and high to choose.
2. Find the icon in the setting inside the application menu, tap or to
select the preferred sound volume.
3. Tap or to leave.
Err01
Err02
Err03
Out of measuring range
Measuring in a proper range
Reflected signal is too weak
Pythagorean calculation error
Low Battery
Out of working temperature
Ambient light is too strong
Check and verify values and
steps are correct
Install new batteries
Measure in an environment
within specified working
temperature
Measure in a darker place
(shadow target)
Select a better surface
Out of display range (Max Value:
99999), e.g: result of area or
dimension is out of display range.
Divide caculation into
intermediate steps
Err04
Err05
Err06
Err07
Code
Description
Solution
