Before calling service, perform the following actions
SPECIFICATIONS
CAMERA MAIN MENU
IRIS
MANUAL / AUTO
FOCUS ADJ
OFF / ON
EXPOSURE
BRIGHTNESS / SHUTTER / SENS-UP / AGC
BACKLIGHT
OFF / HLC / BLC / WDR
DAY&NIGHT
EXTERN / AUTO / COLOR / B&W
COLOR
AWB / COLOR GAIN / TV FORMAT
DNR
MIDDLE / HIGH / LOW / OFF
IMAGE
SHARPNESS / GAMMA / MIRROR / FLIP / ACE / DEFOG / RPIVACY
MOTION
OFF / ON
SYSTEM
TV SYSTEM / FRAME RATE / FREQ / IMAGE RANGE / COLOR SPACE / COLOR BAR / LANGUAGE /
CAM TITLE / RESET
EXIT
SAVE / CANCEL
PROBLEM
CORRECTIVE ACTION
Too dark or bright picture
Readjust contrast or brightness of the monitor
No Power
Check for power connection
Poor picture quality
Clean the camera lens, readjust lens focus
Shrinking picture
Check the power source
PC-7110MHD
CONNECTION AND CONFIGURATION
Press the following button for 5 seconds in order to
change video format.
<LEFT> —
CVBS
<RIGHT> —
TVI
<UP> —
AHD
<DOWN> —
CVI
Press
<ENTER> to access a setup menu. Select one of the items
using buttons
<UP> and <DOWN>. In order to change parameter
value use buttons
<LEFT> and <RIGHT>.
Press
<ENTER> to confirm the selection.
HD-CAMERA
JOYSTICK
VIDEO RECORDER
POWER
POWER SYPPLY 12VDC
VIDEO
PRECAUTIONS
NOTE: PLEASE READ THIS USER GUIDE CAREFULLY BEFORE USE THE CAMERA.
Image Sensor / DSP
1/2.9" SONY 2.1MP CMOS FH8550D
Resolution
1920 х 1080 / 960 х 576
Lens
lens is not included, DC lens support, C/CS mount
IR Led
—
Minimum Illumination
0.001 Lux @F1.2
S / N Ratio
more than 50 дБ
Functions
brightness, contrast, white balance, day & night, BLC, HLC, 3DNR, digital WDR, defog, sence-up
Video Format
AHD2.0, HDTVI, HDCVI, CVBS (are changed by joystick)
Video Output
BNC
Power Supply
12 V DC (±10%) / 550 mA
Operating Environment
indoor installation
Dimensions
148 (W) х 57 (H) x 78 (D) mm
Weight
150 g
1. Read this user guide carefully before using the camera and keep it for
future reference.
2. Avoid direct eye exposure to LED while it is on.
3. Do not install the camera on anstable surface. It can cause falling or other
hazards.
4. Do not use improper power, it can cause fire or electric shock.
5. Do not disassemble or rearrange the camera, it can cause fire, electric shock
or other hazards.
6. Stop using the camera when you find a malfunction like smoke or unusual
heat, it can cause fire or electric shock.
7. Do not cut or peel off the cable. Otherwise water can get into the camera
and the warranty will be void.
8. Do not insert any objects into the camera.
9. Power or video cables shall always be loose. Do not tight or twist the cables.
10. Please use the camera within given temperature and electricity limit.
11. Installation shall be performed by qualified personnel only.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
WWW.PRAXIS-CCTV.RU
MULTIFORMAT
HD BOX CAMERA
IMAGE SENSOR / DSP
1/2.9" SONY 2.1MP CMOS EN771T
RESOLUTION
2 MPIX 1080P
VIDEO FORMAT
AHD / CVI / TVI / CVBS
LENS *
DC IRIS SUPPORT, C/CS MOUNT
IR LEDS
—
HOUSING TYPE
INDOOR INSTALLATION
POWER SUPPLY
12V DC
* LENS IS NOT INCLUDED
