2.2.2 Reassembling the Head - Valve Units
GENERAL PUMP
A member of the Interpump Group
KT24A/28A/30A/32A/36A/40A SERIES
Page 14
Pay particular attention to the conditions of the various components and replace if necessary, and at
the intervals indicated in the “Preventative Maintenance” table in chapter 11 of the use and
maintenance manual. At every valve inspection, replace all O-rings and all anti-extrusion rings both
in the valve groups and on the valve plugs.
Before repositioning the valve unit, thoroughly clean and dry the relative seats in the head as
indicated in fig. 25.
Ref 300943 Rev.A
03-14
