M2000PE
ENGLISH
ISM2000PEEU_12_13.doc
5
1.
GENERAL DESCRIPTION
M2000PE is an access control unit for the operation of two doors.
It is equipped with an integrated 433MHz radio receiver, two inputs for external readers, two output relays with 5A-capacity contacts for direct
connection to the electric locks, and an internal memory with a storage capacity of 2000 user codes.
It is also fitted with 4 keys and a 4-digit display for code and functional parameter setting, and more precisely for
•
programming new codes into the memory (through self-learning via the radio or the readers connected to the inputs);
•
deleting single codes from the memory;
•
selecting either bistable or timed operation mode independently for each relay;
•
setting activation time for each relay (in the timed operation mode);
•
associating any of the four channels of the radio transmitters to each relay;
•
activating transfer of set data to another M2000PE unit connected via the RS485 serial line.
All operations can also be performed through the remote M/KEYB keyboard/display connected to the unit via RS/485.
All M2000PE circuits and components are housed in a plastic enclosure suitable for indoor installation and for mounting on bars according to DIN
standards. The M/KEYB keyboard is housed in an enclosure for wall-mounting or for countertop use.
2.
TECHNICAL FEATURES
Power supply
12-24Vac/dc
Inputs
integrated 433.92MHz radio receiver, 4 ch 2 inputs with Wiegand protocol
Memory capacity
2,000 users
No. of output relays
2, controlled by two Wiegand inputs and/or by radio input, with the possibility of selecting channel address for each
relay. Example: channel 4 transmitter on relay 2.
Contact for enabling reading function on the door (one for each relay).
Inputs for forcing activation of the single door (“door opener” push-button)
Relay operating mode
timed from 1 to 180 seconds
Relay contact capacity
5 A
Programming
4 keys (FUN, INC, DEC, VAL) and 4 displays plus M/KEYB remote optional keyboard/display
Other functions
RS/485 serial communication port for transferring data to a slave unit and for connection of the M/KEYB remote
keyboard with 4 keys and 4 displays
Dimensions and weight
105x90x60, 320 grams
3.
FUNCTIONS
Programming new codes
1. Simultaneously press keys INC and DEC.
2. Select a free storage location via keys INC and DEC (free location is indicated by decimal points being off).
3. Perform transmission or have the badge to be stored read by the badge reader (decimal points will go on).
4. Confirm by pressing key VAL (decimal points will briefly flash).
5. Repeat procedure from step 2 to enter other codes or simultaneously press keys INC and DEC to exit from programming mode.
Deleting codes
1. Simultaneously press keys INC and DEC.
2. Select the storage location to be deleted via keys INC and DEC (decimal points on indicate that the location is engaged)
3. Press the VAL key. The letter -C- will now appear on the left-hand side of the display.
4. Press the VAL key again to confirm deletion. The decimal points will go off and the storage location ‘h’ will be deleted.
5. Repeat procedure from step 2 to delete other codes and simultaneously press keys INC and DEC to exit from the programming mode.
Selecting operation mode and relay timing
1.
Simultaneously press keys INC and DEC.
2.
Press key FUN to access the function selection menu.
3.
Select function F1 (relay 1) or F2 (relay 2) by pressing keys INC and DEC.
4.
Confirm selection by pressing the VAL key; current parameter value will appear on the display.
5.
Select the value to be assigned to the parameter by pressing keys INC and DEC. If value 0000 is set, the relay will operate in the bistable mode.
If a value between 1 and 180 is selected, the relay will operate in the monostable mode with activation time corresponding to the set value
(expressed in seconds).
6.
Confirm by pressing key VAL; display will return to function selection and the new parameter will be stored.
7.
Simultaneously press keys INC and DEC to exit from programming mode.
Assigning radio channel to the relay
1.
Simultaneously press keys INC and DEC.
2.
Press the FUN key to access the function selection menu.
3.
Select function F3 (relay 1) or F4 (relay 2) by pressing keys INC and DEC.
4.
Confirm selection by pressing the VAL key; current parameter value will appear on the display.
5.
Select the desired radio transmitter channel (1, 2, 3 or 4) to be assigned to the relay by pressing keys INC and DEC.
6.
Confirm by pressing key VAL; display will return to function selection and the new parameter will be stored.
7.
Simultaneously press keys INC and DEC to exit from programming mode.
Entering the password
1. Access programming mode by pressing keys INC + DEC.
2. Press the FUN key to access the function selection menu.
3. Select function F5 by pressing keys INC and DEC and confirm by pressing the VAL key.
4. The letter P will appear on the left side of the display. Digit a sequence of six keys within 10 seconds. Each time a key is pressed, the letter P will
flash.
5. Upon the full sequence of six keys having been completed, the function selection menu will reappear on the display.
Failure to complete sequence within 10 seconds will abort password entry. This also avoids entry of incorrect passwords in case of any doubts as to
the sequence to be entered or erroneous pressing of any key.
