PR Australia Pty Ltd, 31 Heathcote Road Moorebank NSW 2170 Tel: 02 8106 3100
Page 1: ... 230 volt feedback wire is required to be hard wired just cut the plug off and hard wire it to a suitably protected generator output circuit If the 2WIRE AS4 controller is to start the generator off a 12 volt DC signal you will need to install a 12VDC interposing relay and utilise the Normally Open contact to provide remote start signal Due to there being a small load on the battery when the contr...
Page 2: ...PR Australia Pty Ltd 31 Heathcote Road Moorebank NSW 2170 Tel 02 8106 3100 ...
