Instruction for installation of small
retractable drawers into Tool Cabinet
TC-1995
It is necessary to implement the installation of
the pre-assembled drawers into the cabinet’s
body starting from the lowest drawer. Pulled
out the main part of the slides, combine and
install the matching mounting elements into
the grooves of the drawer.
NOTES TO THE INSTRUCTION
1. Assembly sequence is specified by the ordinal number in the left upper corner of
each picture of the assembly operation.
2. Type and quantity of the mounting products (if they are necessary) for the
assembly operation are specified near the ordinal number of the assembly operation.
3. Note on the picture’s field specifies the name of the mounting element.
11
Small
retractable
drawer
Tool Cabinet TC
Revision level 24.02.14
