praher AquaStar easy 1000, Operating Manual

Page: 19 / 32

Non-compliance with the instructions contained in the Operation Manual for
installation, putting into operation, operation and maintenance of the
Unauthorized modification of the
Insufficient monitoring of components subject to wear and tear
Inadequately performed repair of the
Damage of the
resulting from foreign matter or Force Majeure
Enuring damage due to neglect of the Operating Manual or due to damaging sealed
parts lead to a lapse of the warranty. We do not take an liability for thus resulting
damages! Please read the Operation Manual carefully before starting.
Each person involved in the user´s facility, in the installation, dismanling, putting
into operation, operation or maintenance of the
must have read and
understood the entire Operating Manual and, in particular, the chapter “Safety
instructions”.
The instruction and warning signs calling attention to dangers must be taken in to
account
This equipment has been built and examined according to safety precaution for
electronic devices and has left the plant in a perfect safety-related condition.
To keep this status and to guarantee a safe operation, the user must observe the
safety instructions, which are included in these operating instructions.
This installation work may only be undertaken by an authorized and licensed
installer or electrical business.
The electrical installations must be carried out according to the respective local
and regional regulations (e.g. OEVE, VDE ...) and possible official regulations.
The electrical connection must have seperating device built into the permanently
installed electrical installation, which enables the disconnection of all electrical
contacts with a contact space of minimum 3 mm from the mains. Pay attention
that the supply voltage is correctly protected and an earth-leakage circuit breaker
30 m A is installed.
Only use the equipment in dry rooms, in which no combustible gases and vapors
are present.
Aquastar
Aquastar
Aquastar
Aquastar
Aquastar
4. Instruction for safety at work
5. Safety instructions
Dangerous voltage
This is for your own safety
Do not operate the equipment immediatly if it has been taken from a cold into a
warm area. The thereby developing condensation water could destroy your
equipment.
19
D
GB