ATTACHING THE VOLLEYBALL / BADMINTON NET
0
E
F
G
H
1.
Completely unfold the net and make sure the
logo points
upwards.
Place the net on the
floor.
2.
Pull one bungee ball through each grommet.
Make sure all the balls are on the same side of
the net.
NOTE:
Don't stretch the elastic cords too close
to the ball, but as far from the ball as
possible, to lengthen the durability of the
bungee balls.
Also, don't stretch them more than 15 cm.
3.
Begin with A. Make sure the logo points
upwards. Pull the loop of the elastic cord
around the horizontal crossbeam of the frame
and then around the ball. The ball can't fit
through the grommet, so you only have to pull
the loop of the elastic cord.
4.
Do the same for
B.
Make sure both
A
and
B
are in the middle of the horizontal crossbeams.
5.
Now attach C and D to the frame: Pull the loop
of the elastic cord around the frame and then
around the ball.
6.
Now attach the final bungee balls at
E, F, G
and
H
to the frame the same way.
The volleybal!/ badminton net is now ready to
use!
4
