1x
1x
1.
2.
Instructions
Box includes the following items:
If you have any issues, please refer to our
instruction video online at practitray.com
If there is a problem with your tray, do not return to retailer.
Please contact us at practitray.com
5/32
page 1
A
B
C
8x
10-24-3/4
F
G
Determine the back bracket
you will need.
The shape of the
horizontal bars that your seat
rests on will determine which
back bracket to use. Your tray is
assembled to fit a round bar
rollator. If your bar is round, go
to step 3.
3.
Attach wires to the back bar.
Rotate tray to the front of the
rollator. Place the clamps on the
rear bar, making sure the wires
are far enough apart to clear
the seat. Rotate the rear clamps
as shown. Insert screws but
do
not tighten all the way
.
4x
D
A.
Tray
B.
Front Wire
C.
Back Wire
D.
Extra Back Brackets
E.
Bracket Caps
F.
Screws
G.
Tool
2x
2x
E
Change out the back
brackets to fit your bars.
If your bars are OVAL use
parts stamped #
4
. If your
bars are OBLONG use parts
stamped #
5
. Remove the cap
and the bottom plastic
bracket and attach the
necessary one to both back
wires. Replace the cap to
hold it in place. The extra
brackets can be discarded.
round oval oblong
cap
bracket
(side view)
cap
