2
4590V100-IN
WARNING
This device is designed for connection to hazardous electric
voltages. Ignoring this warning can result in severe personal
injury or mechanical damage.
To avoid the risk of electric shock and fire, the safety instructions
and warnings of this guide must be observed and the guidelines
followed. The specifications must not be exceeded, and the
device must only be applied as described in the following.
Prior to the commissioning of the device, this guide must be
examined carefully.
Only qualified personnel (technicians) should operate this device.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
Repair of the device must be done by PR electronics A/S only.
Should there be any doubt as to the correct handling of the
device, please contact your local distributor or, alternatively, PR
electronics A/S.
GENERAL
WARNING RISK OF EXPLOSION HAZARD
To avoid risk of explosion and injury:
• Do not use this equipment when a flammable or
combustible atmosphere is present
• Do not replace batteries unless area is known to be safe.
• Use 3 x 1.5V TYPE AAA Batteries only and insert correct
as stipulated in battery compartment.
EXPLO-
SION
ELEC-
TRICAL
SHOCK
WARNING RISK OF ELECTRICAL SHOCK
To avoid risk of electrical shock and injury:
• Do not disconnect the cable from ConfigMate 4590 while
cable is connected to a SYSTEM 3000 device.
• Do not remove 4501 while the cable is connected to a
SYSTEM 3000 device.
• Do not replace batteries while the cable is connected to a
SYSTEM 3000 device.
CONTENTS