PR Lighting XPar 360 PR-8955, Instruction Manual

Page: 11 / 17

11/17
INDICATION OF LED CHARACTER
Decimal point of the first character
On DMX signal OK
Off No DMX signal
Decimal point of the third character
On Master / slave signal is OK
Off No master / slave signal
Decimal point of the fourth character
On When setting master mode
Off When setting slave mode
Parameters that LED characters display Flash Parameters not saved, press “ENTER” to save them
MAINTENANCE
To prolong the life of the projector, it is very important to do the maintenance work. Cooling fans must be cleaned once
every 15days and external lens cleaned periodically for an optimum light output. DO NOT USE ANY SOLVENT
CONTAINING CHEMICAL ELEMENT.
Cleaning frequency depends on the environment in which the fixture operates. Soft cloth and typical glass cleaning
products should be used for cleaning with care. It is recommended to clean projector at least once every 20 days.
Do not use any organic solvent, e.g. alcohol, to clean housing of the apparatus.
TROUBLESHOOTING
PROBLEM ACTION
The projector doesn’t switch on
 Power connection is not correct.

Power supply is damaged or abnormal. Call a qualified personnel
to fix it.
 Connection of control board is not correct. Call a qualified
personnel to fix it.
The projector can be turned on, but LEDs do
not emit light and are out of control.
 Connection of LED board is not correct. Call a qualified
personnel to fix it.
The lamp comes on but the projector
doesn’t respond to the controller

Make sure that the projector is correctly configurated.

Replace or repair the DMX cable.
The beam appears dim

The projector is too hot. Take ventilation measures to make it
cool.