Theatre Colour LT manual.doc
6/12
SETUP OPTIONS
CODE
CHOICE
FUNCTION
001
Not used
002
Not used
003
Not used
Y
Automatic programmes enable
004
N
Automatic programmes disable
005
Not used
006
Not used
Y
Reset (for setup options) enable
007
N
Reset (for setup options) disable
008
Not used
009
Not used
00A
Not used
00b
Not used
STAND-ALONE MODE
For Stand-Alone operation enable option 4 (automatic programmes).
XLR CONNECTORS
DATA -
GND
PIN
DMX512
FUNCTION
1
DATA +
2
3
1
3
3
1
2
1
2
DMX IN
DMX OUT
Connection between controller and projector and between one projector and another must be
made with 2 core screened cable, with each core having at least a 0.5mm diameter. Connection
to and from the projector is via cannon 3 pin XLR plugs and sockets which are included with the
projector. The XLR's are connected as shown in the table above.
Note, care should be taken to ensure that none of the connections touch the body of the plug or
each other. The body of the plug is not connected in any way. The Theatre Colour LT accepts
digital control signals in standard DMX512 (1990) format.
5-PIN AND 3-PIN CONVERSION
Theatre Colour LT uses 3-pin XLR plug / socket. If your controller uses 5-pin XLR plug / socket,
you should convert 5-pin plug / socket into 3-pin socket / plug as shown below.
XLR CONNECTORS AND TERMINATOR