PR Lighting PR-2735, Manual

Page: 8 / 26

8/26
Insert a new lamp. Note: while placing a new lamp, do not touch the burner of the lamp with bare hands, otherwise the light output
will be compromised.
Fasten the 4 fast-fit screws after the lamp cover is on
Important: The unit uses high voltage discharge lamp with external igniter( ). While using the lamp, please carefully read
“INSTRUCTIONS” packed with the lamp.
●
Don’t touch the internal surface of the reflector and the burner of the lamp with bare hands so as not to
impair the beam output. While lamp’s installation, do not damage the metal wire around the burner.
●
Please read "Instructions " enclosed with the lamp
●
Do operate the projector while adjusting the lamp
lamp
Lamp cover
fast fit screw