MEGA 4000_ Last Revision_En.doc
4/6
Use the plug provided to connect the mains power to the projector paying attention to the
voltage and frequency marked on the panel of the projector. It is recommended that each
projector is supplied separately so that they may be individually switched on and off. It is
recommended that the projector connect to the mains using a 3-pin 32A plug.
Remove the front and back covers of the projector-head.
Install the lamp in the proper position.
Fix the both ends of the lamp via tight the two nuts.
●
Power supply: 230V AC 50Hz
●
Power consumption: 4150W at 220V
●
IP rating: IP44
●
Lamp: Xenon 4000W
●
Colour temperature: 6000°K
●
Beam angle: 0 to 25 degrees, adjustable, visible for up to 10 kilometres
●
Rotating angle: 0 to 180 degrees, adjustable
●
Control: Automatic stand-alone operation
●
Head movement: Pan 180°, tilt manually adjustable through 40°
●
Dimensions: 750mm
×
680mm
×
1000mm
●
Net weight
：
97kg
●
Others: Safety device for high temperature
●
The cleaning of internal and external optical lenses and mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates: damp, smoke or particularly dirty surroundings can cause
greater accumulation of dirt on the unit’
s optics. A soft cloth and the typital products of
cleaning glass should be used in cleaning. It is recommended that clean the external
optics at least once every 20 days and clean the internal optics at least once every 30
/60 days.
●
Do not touch the glass-bulb with bare-hand during installation. Before operation, please
clean the lamp with alcohol so as to improve the lamp’
s effect and prolong the lamp’
s
life.
●
Please do not use any organic solvent, e.g. alcohol, to clean the housing of the
apparatus.
TECHNICAL SPECIFICATIONS
MAINTENANCE AND CLEANING
POWER SUPPLY - MAINS
FITTING THE LAMP
