6/12
●
TRANSPORTATION
Before transportation, tighten screws after the fixture and the support are overlapped.
●
POWER CONNECTION
Connect the power cord as follows:
L (live) =brown
E (earth) =yellow/green
N (neutral) =blue
Before power connection, please ensure the power supplied must match what the nameplate says. It is recommended that each
projector be connected with power separately so that they may be individually switched on and off.
●
The earth wire(yellow/green) must be connected to the ground. And electrical connection must be in
accordance with the standards concerned.
●
If any questions about the electrical installation, do not continue but consult a qualified electrician.
5.
DMX PROTOCOL
GBA
Mode
HSIC
Mode
Function
DMX Value Description
1
1
Effect
0
Stop rotation
