.07.
Regardless of the rigging option you choose for your JNR JNR ELLIPSOIDAL 200Z-W,
always be sure to secure your fixture with a safety cable. The fixture provides a built-
in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure
to only use the designated rigging point for the safety cable and never secure a
safety cable to a carr ying handle.
Connect the provided XLR cable to the female 3-pin XLR output of your controller and
the other side to the male 3-pin XLR input of the moving head. You can chain multiple
Moving head together through serial linking. The cable needed should be two core,
screened cable with XLR input and output connectors. Please refer to the diagram
below.
DMX-512 connection with DMX terminator
DMX-512 CONTROL CONNECTIONS
6
LED DISPLAY
UP
DOWN
FUNC
POWER IN
POWER OUT
Ground
ENTER
FUSE
5-Pin DMX IN
5-Pin DMX OUT
3-Pin DMX IN
3-Pin DMX OUT
Power Switch
POWER IN
3-Pin DMX IN
5-Pin DMX IN
Specifications
Input Voltage:AC90-260V 50/60Hz
LED Quantities:1*200W COB LEDs (available for Warm White)
Control Signal:DMX512, master-slave and sound activated or auto operation
Control Channel: 1/3 DMX channels USITT DMX-512
Power Consumption:260W
Dimensions:195(D)*720(W)*415(H)mm
Packing List: 332(D)*832(W)*345(H)mm
Net Weight: 10.2kg
Gross Weight: 12.2kg
.04.
415
195
720
195
PHOTOMETRIC DATA
4
0m
1m
3m
5m
7m
15
°
34150
4620
1780
950
FC =
0.0929
LUX *
Photometric
Beam
Angle
Data
( ø
0.7
)
BEAM
DIAMETER
( ø2.1 )
( ø3.4)
( ø4.8 )
m
<15
°
>
102400
11560
4420
2560
( ø
0.
3 )
BEAM
DIAMETER
( ø0.8 )
( ø1.3)
( ø1.8 )
m
<38
°
>
38
°
If you connect fixtures to AC power in a linked chain, please do not link more than:
1. Three(3) fxitures at 100-120VAC, 50/60Hz.
2. Four(4) fixtures at 200-240 V, 50/60Hz.
