PR Lighting AQUA MARINE 580 BEAM, Manual, Page: 18 / 28

18
193-255 Rotation(Anti- Clockwise from slow to fast)
14 17 21 Prism 2
000-016 White
017-127
Prism3
128-255 Frost in
15 18 22 Prism2 Rotation
000-127 Prism2 Indexing
128 Stop
129-191 Rotation(Clockwise from slow to fast)
192 Stop
193-255 Rotation(Anti- Clockwise from slow to fast)
16 19 23
Focus
000-255
Linear focus
20 24 Focus Fine
000-255
Focus in 16 bit precision
17 21 25 Pan 000-255 Pan(0°~540°)
18 22 26
Pan Fine
000-255
Pan in 16 bit
19 23 27 Tilt 000-255 Tilt(0°~270°)
20 24 28 Tilt Fine 000-255 Tilt in 16 bit
21 25 29
Pan & Tilt Speeds
000-255
Pan & Tilt Speed from Fast to Slow
22 26 30 Control
000-019 Reserved
Keep in the DMX range for more than 5S to activate the following
functions. If power-off, the following are invalid.
020-024 Graphic Display On
025-029 Graphic Display Off
030-034
Reserved
035-039 Lamp ECO Power
040-044
Lamp Full Power
045-089 Reserved
090-094 Pan & Tilt Speed Mode
095-099
Pan & Tilt Time Mode
100-129 Reserved
130-139
Lamp On
140-149 Pan & Tilt Reset
150-159 Color System Reset
160-169 Gobo Wheel Reset
170-179 Dimmer/Shutter Reset
180-189
Zoom/Frost/Focus/Prism Reset
190-199 Reserved
200-209 Total Reset
210-229
Reserved
230-239 Lamp Off
240-255
Reserved
1. The projector can’t be turned on within 1 minute after the lamp-off.
2. Fan error can cause lamp-off.
3. "Speed Mode" means Pan and Tilt will move from Point A to Point B at their respective maximum speeds."Time Mode"
means both Pan and Tilt will arrive at designated point at the same time. It's advised Time Mode be used if the projector runs
circles or in oblique lines.
4. In the range of 6 and 24 under the CTO channel, it controls the move of the diffuser. The rotating gobo wheel’s open