PR Lighting AQUA LED 1500 SPOT, Manual, Page: 18 / 30

18
Total reset 200 209
Reserved 210 229
Reserved 240 255
Note:
1. Fan errors can cause LED lamps to be shut off;
2. "Speed Mode" means Pan and Tilt will move from Point A to Point B at their respective maximum speeds."Time Mode" means
both Pan and Tilt will arrive at designated point at the same time. It's advised Time Mode be used if the projector runs circles or in
oblique lines.
8. SIGNS ON THE DISPLAY
Lamp Control
Option Settings
Chinese/English
Information
Error Messages
Service
Address
Operation Mode
Reset
User Memories
Config Settings
9. ERROR MESSAGE
The system can detect some errors during the reset, if displayed, touch to view the error.
The error messages are as follows:
Name Type Correction
Pan
Timeout/magnet Sensor/Encoder Check if wiring, positioning parts and motors are normal
Tilt
Timeout/magnet Sensor/Encoder Check if wiring, positioning parts and motors are normal
Cyan Timeout Check if wiring, positioning parts and motors are normal
Yellow Timeout Check if wiring, positioning parts and motors are normal
Magenta
Timeout Check if wiring, positioning parts and motors are normal
CTO Timeout Check if wiring, positioning parts and motors are normal
Color wheel Timeout Check if wiring, positioning parts and motors are normal
Rotating gobo wheel1
Timeout Check if wiring, positioning parts and motors are normal
Gobo rotation 1
Timeout Check if wiring, positioning parts and motors are normal
Rotating gobo wheel2
Timeout Check if wiring, positioning parts and motors are normal
Gobo rotation 2 Timeout Check if wiring, positioning parts and motors are normal
Dimmer
Timeout Check if wiring, positioning parts and motors are normal