manualshive.com logo in svg

PR electronics 3114, Manual, Page: 3 / 36

Share
Download
PR electronics 3114 Manual Download Page 3

3114V101-UK

 1

IsolatED UnIvERsal ConvERtER 

3114 

 

ContEnts

Warning ..........................................................................................  2

Safety instructions ..........................................................................  4

UL installation ............................................................................  4

cFMus installation in Division 2 or Zone 2 ................................  5

IECEx, ATEX installation in Zone 2 ............................................  5

Flexible supply ...............................................................................  7

Mounting and demounting of system 3000 ...................................  8

Installation on DIN rail ....................................................................  9

Supply of power rail .......................................................................  9

Side label ........................................................................................  9

Highlights .......................................................................................  10

Advanced features .........................................................................  10

Applications ....................................................................................  10

Technical characteristics ................................................................  10

Product overview ...........................................................................  11

PR 4501 Display / programming front ...........................................  12

ConfigMate 4590 adapter ..............................................................  13

Display readout on the 4501 of sensor error detection

  and input signal outside range ..................................................  19

Sensor error detection limits ..........................................................  19

Error indications .............................................................................  20

Connections ...................................................................................  21

Installation on power rail ................................................................  22

Marking ...........................................................................................  23

LED indication ................................................................................  24

Default configuration ......................................................................  25

Configuration /  operating the function keys .................................  26

Routing diagram .............................................................................  30

Routing diagram, Advanced settings (ADV.SET) ............................  31

Scrolling help text in display line 3 ................................................  32

NB.: Click on the entries in the table of contents to go to the desired section.

Summary of Contents for 3114





































Reviews:

No comments