6
RECOG knob is used to adjust metal detection mode to identify the metal type. We
detect metal objects because of differences in the quality of its degree or other metal
element -containing impurities, lead to confusion electromagnetic signal leaving the
instrument will not be able to properly identify, so need to be adjusted to enhance the
instrument recognition ability to distinguish .
4. TUNER
Tune knob is in collaboration with various operating knob debugging instrument used
to coordinate the arrow keys when using the built- balance each knob are likely to use
this knob to adjust the fit of the instrument, it is ultimately the instrument to achieve
the best working condition.
5. Phone Out
SLKD-M802 instrument can be equipped with headphones. After plug in headphones,
external speakers sound interruption, the operator can hear the sound from the headset,
so that operating in a noisy or night environment. Use the headset to get battery
saving, meanwhile it is easy to determine the sound subtle changes, so as to achieve
better detection results. The headset is connected to the detector, we need to plug the
headset into the host back-end headphone jack.
6. Power Supply Socket
In addition to the built-in battery box, and set up an external power supply,
but
considering the customs forbid the export of battery, we will equip the external power
supply or not according to the actual demands.
7. Dashboard Line Jacket
8. Detection Mode Switch
The instrument setting two detection modes-GROBAL mode and RECOG mode to
help us in detecting selection, so that find the object detected quickly.
(1) GROBAL mode: All-metal mode, it can not distinguish nonferrous or ferrous
metals in the detection, only response metal electromagnetic signals and prove the
exist of metal .
(2) RECOG mode: Recognition mode, it can distinguish nonferrous or ferrous metals.
9. Working mode switch : CONVE and SET