6
Note : Manipulator must press reset button after adjusting SENS knob every time.
6.
Phone Out
SLKD-M801 instrument can be equipped with headphones. After plug in headphones,
external speakers sound interruption, the operator can hear the sound from the headset,
so that operating in a noisy or night environment. Use the headset to get battery
saving, meanwhile it is easy to determine the sound subtle changes, so as to achieve
better detection results. The headset is connected to the detector, we need to plug the
headset into the host back-end headphone jack.
Introduction of Signaling Display Device
1. Power LED
This light up after starting up, it indicates that the instrument is in a state of power-on.
2. Low Voltage LED
When this light is on, the meter voltage is insufficient , the instrument will not work
normally, you need to replace or recharge.