23
Web Page Settings / Using the WiFi Access Point
(1)
Press and hold the power button for 2 seconds until the LED turns green, indicating the Air Pen
has been powered up. Wait a few seconds for the blinking blue WiFi LED light, which means the
wireless network function has been activated.
(2)
Use your WiFi devices to establish wireless connection with the Air Pen.
(3)
When the connection is established successfully, start your Web browser and enter
“
192.168.200.1
” in the URL field.
Log into the setting page
(1)
Enter your name and password
(2)
Press the
“
Login
”
button
Setting the log in information
(1)
Enter the name and password you
’
d like to use
(2)
Enter the password again for confirmation
(3)
Press
“
Confirm
”
to accept the changes
(4)
Use the new name and password to log in again
AP Mode
(1)
Give your Air Pen a new device name/SSID
(2)
Check
“
Security
”
to setup a new password
(3)
Select a suitable WiFi channel setting
(4)
If your Internet connection will provide an IP address, choose
“
WAN DHCP
”
(5)
If your Internet connection needs to use a static IP address, do not choose
“
WAN DHCP
”
and
use the following settings instead:
Static IP
Submask IP
Gateway IP
(6)
Press
“
Apply Changes
”
to confirm the new settings
Concurrent Mode
(1)
Press the
“
Scan
”
button to look for nearby WiFi networks
(2)
Choose the name of the network you
’
d like to use, then press
“
Connect
”
(3)
If the connection is established successfully, your hendheld device can now surf the Interet via the
Air Pen
