11. Insert the cartridge into a
Semco
dispensing gun. Please refer to the
relevant
Semco
dispensing gun
Technical Data Sheet for proper
assembly and operation of the gun.
12. Dispense a small amount of the
sealant onto a clean cloth, sheet of white
paper, or onto the surface of the Mylar
®
bag for inspection. Inspect that the
sealant is homogeneous and free of skins
or lumps. Correctly mixed sealant will be
free of any striations or color marbling.
If color banding or marbling are present,
the sealant may need additional mixing.
If necessary, insert the dasher rod and
install it into the dasher element with 3
clockwise rotations. Continue mixing as
listed in step 7 until no more banding or
striations are observed.
13. Apply the sealant as required by the
relevant process specification or work
instructions.
14. When finished using the sealant,
(i.e.: the cartridge is empty, or the sealant
has reached the end of its rated applica-
tion life), dispose of the
Semkit
package,
dasher rod and nozzle properly in
accordance with local and site hazardous
material requirements.
Mylar brand is a registered trademark owned by Dupont Tejjin Films
All recommendations, statements, and technical data contained herein are based on tests we believe to be reliable and
correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either
expressed or implied. User shall rely on his own information and tests to determine suitability of the product for the intended
use and assumes all risks and liability resulting from his use of the product. Seller’s and manufacturer’s sole responsibility
shall be to replace that portion of the product of this manufacturer which proves to be defective. Neither seller nor manufac-
turer shall be liable to the buyer or any third person for any injury, loss, or damage directly or indirectly resulting from use of, or
inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an
officer of the manufacturer shall not be binding upon the manufacturer or seller.
Semkit is a trademarks of PRC-DeSoto International, Inc.
PRC-DeSoto International, Inc.
12780 San Fernando Road
Sylmar, CA 91342
USA
Telephone (818) 362-6711
Toll Free (800) AEROMIX
Fax (818) 627-3770
www.ppgaerospace.com
Issued: 10/19
Supersedes: New
LIT# 4713
Catalyst in dasher rod with base in cartridge
Injection style PPG Semkit
®
package
Manual use instructions (
continued
)
Step 11 D
Step 11 E
Step 12 A
Step 12 Good
Step 12 Bad
Step 14
Good
Bad
