Xcelerators Owner’s Manual
10
Selection arrow will be on “Tune Engine” option.
Select on the keypad.
Thouroughly read message with the on the keypad.
Accept by pressing on the keypad.
Locate the OBD II diagnostic port on your vehicle.
(See page 6 for reference pictures)
INSTALLING TUNE INTO VEHICLE PCM
STEP 1
Connect the Xcelerator into vehicles diagnostic port. When prompted turn the
ignition key to the RUN position
(DO NOT start engine)
; the Xcelerator will load
through a seris screens and stop. The main menu will load as shown:
STEP 2
Tune Engine
Current Tuning
Data Scanning
Diag. Options
STEP 3
The programmer will check your VIN #, unlock your PCM and save the vehicle’s
stock information. Do not disturb the Xcelerator or start the engine during this
download and testing process! (approx 5-10 mins.)
Any interference during the programming process (ie. opening or clos-
ing of your vehicle’s doors) may cause a communication error with your
vehicle’s PCM and will result in your vehicle not starting!
STEP 4
If you are going
past this screen
you have Read
and Agreed to
the Disclaimer
provided in the
package.
Accept Y or N
