Manufactured by:
Motoppar da Amazônia Indústria e Comercio de Eletrônicos LTDA
Praça Linear, 100, Bloco 2 - Centro - Santa Rita do Sapucaí - MG - CEP 37540-000 - Brasil
CNPJ: 09.084.119/0002-45
www.ppa.com.br | +55 14 3407 1000
LINE
GENERAL TERMS AND CONDITIONS OF WARRANTY
MOTOPPAR, Industry and Commerce of Automatic Gate Operators Ltd., registered with the CNPJ (National
Registry of Legal Entities) under Number 52.605.821/0001-55, located at 3526 Dr. Labieno da Costa Machado
Avenue, Industrial District, Garça – SP – Brazil, Zip Code 17400-000, manufacturer of PPA Products, hereby
guarantees this product against design, manufacturing or assembly defects and/or supportively as a result
of material quality flaws that could make its intended use improper or inadequate, within a legal period of
ninety days from time of acquisition, provided that the installation instructions described in the instruction
manual are observed.
Due to the credibility and trust placed on PPA products, we will add 275 more days to the period mentioned
above, reaching a warranty period of one year, likewise counted from the time of acquisition proven by
consumer through proof of purchase (Customer Receipt).
In case of defect, within the warranty period, PPA responsibilities are restricted to the repair or substitution of
the product manufactured by the company, under the following conditions:
1. Repair and readjustment of equipment may only be carried out by PPA Technical Assistance, which is
qualified to open, remove, and substitute parts or components, as well as repair defects covered by this
warranty; thus, failure on observing this guideline and the verified use of any non-original parts will cause
the resignation of this warranty on the part of the user;
2. The warranty will not extend to accessories such as cables, screw kit, fixing brackets, power supplies etc.;
3. Expenses for packaging, transportation and product reinstallation will be sole responsibility of the
consumer;
4. The equipment must be sent directly to the Company responsible for the sale (manufacturer's
representative), through the address contained in the purchase invoice, properly packed, thus avoiding
loss of the warranty;
5. Within the additional period of 275 days, visits and transportation in places where authorized technical
assistance is not available will be charged. The cost of transportation of the product and/or technician will
be sole responsibility of the consumer and
6. The substitution or repair of the product does not prolong the warranty time.
This warranty will be terminated if the product:
1. Is damaged by natural agents, such as atmospheric discharges, floods, wildfires, landslides etc.;
2. Is installed in an improper electric power supply or if it is not according to any of the installation instructions
displayed on the manual;
3. Shows defects caused by droppings, collisions or any other physical accident;
4. Shows signs of product violation or attempted repair by unauthorized personnel;
5. Is not used for its intended purpose;
6. Is not used under normal conditions;
7. Is damaged by accessories or equipment connected to it.
Recommendation:
We recommend that both the installation and the maintenance of the operator to be performed by an
authorized PPA technical service. If the product fails or has an improper operation, seek an Authorized
Technical Service to fix it.
SENSOR SMART SLIM PET
USER’S MANUAL
P31566 - 09/2022
Rev. 0
ATTENTION!
Do not use this equipment
without first reading the
User’s Manual
TECHNICAL FEATURES
- Double pyroelectric element.
- 12-m detection range x 110° aperture.
- 2-second activation time on detection.
- 3 levels of sensitivity.
- RF Protection: 25v/m up to 1Ghz.
- Stabilization time: 60 seconds.
- Supply voltage: 9~18Vdc,
- Consumption: 10 mA @ 12Vdc.
SENSOR DIMENSIONS
Note:
All dimensions are in millimeters.
PRECAUTIONS
- Do not touch the pyroelectric element of the sensor.
- Avoid possible sources of false alarms in the sensor detection area (e.g. air conditioners,
direct sunlight on the sensor lens, open places where it can be windy).
- Avoid direct white light to the sensor.
- Fix the sensor on solid walls that do not suffer vibrations.
- Do not run the sensor cables along the electrical power supply wiring.
- Avoid obstacles in the sensor detection area.
PET FUNCTION
Secure against up to 20-kg creeping animals.
OBS.:
Articulators should be installed for the pet function to work correctly.
100
40
34
DETECTION RANGE
The figure below shows the sensor detection range seen from above and from the side.
The maximum coverage angle is 110o, and the reach is 12 m when
installed at 90o and 2.4 m above the ground.
MAIN COMPONENTS OF THE BOARD
The figure below shows the sensor board with its components:
SENSITIVITY ADJUSTMENT
This sensor has 3 sensitivity levels adjusted through the “JP1” pin bar. To change the sen-
sitivity level, just change the jumper position to positions “MIN” (lowest sensitivity level),
“MED” (intermediate sensitivity level), and “MAX” (highest sensitivity level).
ATTENTION!
2.4 m is the maximum
recommended height
to install the sensor.
“LD1” SIGNALLING
LED
WITH RESISTOR: LED ON
WITHOUT RESISTOR: LED OFF
Sensitivity
adjustment
Alarm
output
Power supply
input
9 ~18 Vdc
* PYROELECTRIC SENSOR
ATTENTION!
- AVOID TOUCHING THE SENSOR WINDOW.
- USE ONLY ETHYL ALCOHOL AND COTTON WHEN
CLEANING IS NECESSARY.
- DO NOT TOUCH THE SENSOR WITHOUT PROTECTIONS
TO AVOID ELECTROSTATIC DISCHARGES.
WITHOUT RESISTOR: normally open
alarm output (NO). When detection
occurs, the output closes.
WITH RESISTOR: normally closed
alarm output (NC). When detection
occurs, the output opens.
