11
Revision 2.0
5.
If the antenna assembly starts to fall,
get away from it and let it fall to avoid
harming yourself.
•
When drilling remember:
1.
Use safety goggles when drilling the
holes.
2.
Avoid using bits that are dull, bent or
damaged.
3.
Be aware of where your fingers are in
relation to the drill bit when using the
drilling machine.
4.
To stop the drilling machine, let the drill
chuck come to a complete stop on its
own. Do not grasp the chuck in an
attempt to stop the drill bit.
5.
Avoid awkward hand positions where a
sudden slip could cause a hand to
move into the drill bit or cutting tool.
CAUTION:
Antennas must be installed to provide a separation
distance of at least 20cm from all persons so as to
comply with SAR (Specific Absorption Rate) RF Exposure
requirements.
European Waste Electronic Equipment Directive
2002/96/EC
Please ensure that old waste, electricals
and electronics are recycled.
Directive 2011/65/EU (RoHS 3)
This product is fully compliant with the RoHS 3
directive.
