Version: 1.0
7
Mounting Configuration
3
1. Pole Mounting
•
Lay the antenna out at the installation site
and carefully assemble the antenna to the
L-bracket using the provided bolts.
•
Next place the U-bolts around the pole
and push both the econo brackets and the
assembled L-bracket through the U-bolts.
Tighten the nuts on the U-bolt until the brack-
et is secured to the pole.
•
Mount the antenna so that there is at least 1
meter of clearance in all directions around
it and unobstructed line of sight to the cell
tower’s strongest signal.
OMNI-296 is a pole and wall mountable,
omni directional antenna. It can be mounted
outdoors on a pole of up to 50mm in diameter,
or against a wall. Follow the instructions below
for installation.
M4 Screws
M6 Nuts &
M6 Washers
M6 U-Bolts
Econo Brackets
Summary of Contents for OMNI-296
Page 2: ...2 A OMNI 0296_PCL...
