12
A-XPOL-0002-V3-5G_PCL
7
Safety
4.
Avoid operating while under the
influence of drugs, alcohol or
medication.
5.
Make sure that any loose fitting
jewellery or clothing is secured and tie
back long hair as they can get caught
in moving parts during installation.
6.
If the antenna assemble starts to fall,
get away from it and let it fall to avoid
harm to yourself.
• When drilling, remember
1.
Use safety goggles when drilling the
holes.
2.
Avoid using bits that are dull, bent or
damaged.
3.
Be aware of where your fingers are in
relation to the drill bit when using the
drilling machine.
4.
To stop the drilling machine, let the drill
chuck come to a complete stop on
its own. Do not grasp the chuck in an
attempt to stop the drill bit.
5.
Avoid awkward hand positions where
a sudden slip could cause a hand to
move into the drill bit or cutting tool.
CAUTION:
Antennas must be installed to provide
a separation distance of at least 20cm
from all persons so as to comply with SAR
(Specific Absorption Rate) RF Exposure
requirements.
European Waste Electronic Equipment Directive 2002/96/EC
Please ensure that old waste
electricals and electronics are recycled.
Directive 2011/65/EU (RoHS 2)
This product is fully compliant with the RoHS
2 directive.
Summary of Contents for A-XPOL-0002-V3-5G
Page 2: ...2 A XPOL 0002 V3 5G_PCL...
