Powrtran ProTabs, Installation And Operation Manual

Page: 10 / 28

10
4
5
Put 3M 5200 (or equivalent) sealant into the preholes
and fix the hinge to the transom by using the supplied
self-tapping screws (H). Once the hinge has been
fixed, apply sealant to the perimeter.
Position the spherical head of the actuator rod (A1)
between the plastic bracket (C1) and the flange (C2).
Fasten the three components to the tab (B1) by means
of the 4 screws (D) and 4 nuts (E).
!
NOTICE
!
NOTICE
All of the supplied screws are
stainless steel. Never use
any other type of fastener.
The actuator (A1) is provided from the
factory in the fully-retracted posi-
tion. For the installation, it is strictly
necessary not to power it to avoid any
possible position change.
The bracket MUST be installed exactly
as shown in the picture.
!
WARNING