Powrmatic ErP NVS 140, User, Installation & Servicing Manual

Page: 6 / 36

page no. 6 of 36
NVS Range Users, Installation & Servicing Instructions Doc Ref M102 issue 2.4 May 2018.
Model 30 60 90 140
Output kW 30 60 90 140
Input (nett CV) kW 29.02 59.22 86.74 137.95
Airflow
Volume (All Models) m
3
/s 0.78 1.56 2.34 3.64
Throw NVS F m 24 25 31 37
Fan Static NVS C Pa 250 250 200 285
Electrics
Supply
Standard V/ph/Hz 230/1/50
Optional V/ph/Hz 415/3/50
NVS F
Motor kW 0.39 0.66 2 x 0.39 2 x 0.66
Start amp 3.76 5.5 5.0 10.6
Run amp 1.70 2.4 2.3 5.3
NVS C
Motor kW 1.10 1.40 2 x 1.10 2 x 1.40
Start amp 18.50 28.90 31.0 40.0
Run amp 6.40 9.50 12.80 17
Fuel
Connection BSP/Rc ¾”
Minimum Inlet
Pressure
Nat Gas mbar 17.5
LPG mbar 37.0
Consumption
Nat Gas m
3
/h 3.07 6.26 9.17 14.60
LPG m
3
/h 1.21 2.42 3.55 5.64
Mounting
Height
NVS F
Min m 2.50 3.00
Max m 3.00 5.00
Overall
Dimensions
NVS F
Height mm 818 818 705 1035
Width mm 1050 1345 2345 2345
Depth mm 1187 1204 1187 1204
Installation
Clearances
NVS
Top mm 200
LH Side mm 200
RH Side mm 1000
Rear mm 600
Condensate
Output
Connection mm 15 15 15 15
Natural Gas l/h 2.3 3.4 6.0 8.8
Propane l/h 1.2 1.7 3.0 4.4
Flue
Diameter mm ø 100 130
Maximum Length
Flue Only m 12
Room Sealed m 6
Combustion Air Spigot mm ø 100 130
Noise Level dB(A) 54 62 66 67
Nett Weight
NVS F kg 124 177 245 350
NVS C kg 195 252 384 514
Notes –
Fuel consumption and output figures based upon nett calorific values as follows
- Natural gas (G20) nett CV 34.02 MJ/m³
- Propane (G31) nett CV 88.00 MJ/m³
• Heaters have efficiency levels which meet with the minimum efficiency requirements of UK PartL2B Building Regulations
• Heaters have efficiency levels which meet the criteria of the Enhanced Capital Allowance Scheme (Excluding NVS30)
• Air handling data is assessed at room ambient conditions
• Throw figures provide the distance to the point where the terminal velocity degrades to 0.25 m/s
• Dimensions and clearance data in table above refer to NVS F units only.
• Condensate rates are approximate and for when heaters are working at maximum output.
• Noise levels are applicable to standard NVS F models and are measured 5m from appliance and in free field conditions
• Motor kW, run and start amps apply to standard electrical supply as stated. For optional data contact sales office
• Connection of combustion air duct is not required for ‘flue only’ applications.
Duties