7
For upholstery cleaning and inaccessible
areas. Attach recovery hose to recovery
hose position of vacuum shoe. Connect the
accessory solution hose to the solution fitting
at the front of the machine by pushing back
the locking ring to fit. Turn on vacuum and
pump.
ACCESSORIES / TOOLS (OPTIONAL)
ROUTINE MAINTENANCE INSTRUCTIONS
DAILY / INTERVAL
1) Check the spray jets for blockage and a uniform spray pattern. Remove jets and blow
through to clean. Do not use a pin as this may cause damage to the jets.
2) Check and remove any debris or lint build-up from the vacuum head, brush, and brush
housing.
3) Always wash out the tanks with clean water after use. To do this, pour clean water into the
solution tank and spray through spray tip to clear chemical residue from the pump, lines,
and spray tip. Allow the vacuum to run for a few minutes after use to aid the machine in
drying out and to help prevent bacteria and odors.
WEEKLY
1) Inspect hoses (unseen blockages sometimes occur), hose cuffs, and the rubber seal on the
recovery tank lid. The main cable, plug, and switches should also be examined for damage.
NOTE:
It is advisable to store the unit with the recovery tank lid removed.
CAUTION: THIS UNIT MUST BE PROTECTED FROM FREEZING
. Damage from freezing could cause
machine to malfunction and void warranty on broken parts.
