Powr-Flite PFX1080AW Operators Manual & Parts Lists Download Page 6

6

Storage of Equipment

1.  Store extractor indoors in dry area.

2.  Recovery and solution tank should be empty and clean 

 

when the extractor is not in use.

3.  Leave the recovery lid and drain hose open to air out the 

 

recovery tank.

4.  Do not store in freezing temperature.

5.  A small amount of windshield washer fluid may be left in 

the pump and internal solution line for protection against 

freezing.

Warnings

1.  Do not break off or pull the grounding prong on the plug.

2.  Do not attempt repair on a warrantied machine unless 

 

instructions to perform it by an authorized shop are 

 

obtained from the factory.

3.  Do not use citrus-based (D-Limonene) cleaners in this 

 machine.

4.  Do not use cleaning chemicals in this machine except 

 

those recommended for steam-type extraction equipment.  

The use of any chemicals with abrasive additives voids the 

 warranty.

5.  Do not use any replacement parts except those specified 

 

on the parts list.  Performance of the machine could be 

affected if substitutions are made.

6.  Do not use water in excess of 140° F (62° C) through 

 

the pump system. It could damage the seals and polypro-

phene casing of the diaphragm pump.

7.  Follow maintenance schedule strictly.

8. 

Failure to comply with the above warnings 

 

instructions will void the warranty.

ONE LAST REMINDER

Read All Instructions, Warning and Cautions Before Using. These guidelines are presented for 

your protection and convenience. Please read them carefully, since failure to heed these 

precautions could result in discomfort or injury. When using an electrical appliance, basic 

safety precautions should always be followed.

WARNING

TO AVOID FIRE, DO NOT USE WITH A FLAMMABLE OR COMBUSTIBLE  

LIQUID TO CLEAN FLOOR.

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for PFX1080AW















Reviews: