6
m
aIntenance
Routine maintenance can significantly increase the life of your Hybrid Dryer. The applications and amount of use
varies, so the recommendations listed below are for average-to-high volume use. Constant operation may require
additional maintenance.
Always unplug machine before cleaning, or making any adjustments or repairs.
Before Each Use
1. Inspect power cord for fraying, cuts or damage; do not use if damaged.
2. Remove lint or obstructions from the Intake Guard and Exhaust Port Guard using a vacuum or compressed air.
3. Inspect exterior components (switch, knob, etc.) for damage.
After Each Use
1. Remove any lint or debris from the intake screen.
2. Clean dust and dirt from motor using a vacuum or compressed air.
3. Snugly wrap the power cord around the cord wrap/feet and secure the end of the power cord to itself using the latch on
the plug of the power cord.
4. Clean the exterior with a household all-purpose spray cleaner. Spray the rag, then apply to the surface.
Periodic Maintenance
1. Inspect all electrical connections.
2. Check the power cord for any breaks, fraying, separations, or cuts.
3. Make sure the ground pin or grounding prong is intact.
4. Inspect the motor and fan for build-up of debris, removing the intake screen and fan, cleaning as required.
If the dryer will not turn on:
1. Make sure the power cord is firmly connected to the unit and is in good condition.
2. Make sure the power cord is firmly seated in the wall outlet.
3. If using an extension cord, make sure it is in good condition, proper gauge and firmly connected.
4. Check to see if the building circuit breaker is tripped. If circuit is overloaded, move the unit to another circuit. On PDH2 - check
circuit breaker on unit.
Always store the dryer in a dry place. The dryers can be stacked during storage or transport to minimize the required space. The
stacking guide is located on the top and bottom of each unit.
WARNING!
t
rouble
S
hootIng
S
torage