Powr-Flite PDH1 Operators Manual & Parts Lists Download Page 4

4

This dryer must be grounded! Grounding is a safety measure to reduce the risk of electrical shock to the operator 

should the machine malfunction or stop working. Grounding provides the path of least resistance for electric current 

and will trip the circuit breaker, stopping the flow of electricity.
This unit is equipped with a cord that has an equipment-grounding conductor and grounding plug. The plug must 

be inserted in an appropriate outlet that is properly installed and grounded in accordance with all local codes and 

ordinances. Cutting off the ground wire or using a cord that is not equipped with a ground plug will void the warranty 

on the unit. Powr-Flite will accept NO liability associated with the unit.

The dryers are for use on a nominal 120-volt circuit, and have a grounded plug that looks like the plug illustrated in 

Figure A. A temporary adapter that looks like the adapter illustrated in Figure B and C may be used to connect this 

plug to a 2-pole receptacle as show in Figure B if a properly grounded outlet is not available. The temporary adapter 

should be used only until a properly grounded outlet (Figure A) can be installed by a qualified electrician. The green 

colored rigid ear, lug, or the like, extending for the adapter must be connected to a permanent ground such as a 

properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. 

 

 

 

 

 

 

 

Note: In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical Code.

The replacement or repair of damaged wiring should only be performed by a qualified  

electrician or service engineer from the manufacturer or authorized service center.

g

roundIng

 I

nStructIonS

Improper connection of the equipment-grounding conductor can result in a risk 

of electric shock. Check with a qualified electrician or service person if you are 

in doubt as to whether the outlet is properly grounded. Do not modify the plug 

provided with the appliance. If it will not fit the outlet, have a proper outlet installed 

by a qualified electrician.

WARNING!

WARNING!

Powr-Flite.com

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for PDH1











Reviews: