Powr-Flite 98150-PF Operators Manual & Parts Lists Download Page 3

IMPORTANT SAFETY PRECAUTIONS

WARNING!:  To reduce the risk of fire, electric shock, or injury

This machine is intended for commercial use.  It is designed to clean carpet and 

upholstery in an indoor environment and is not constructed for any other use.  Use only 

recommended cleaning solutions and accessory tools.

All operators must read, understand and practice the following safety precautions.

WARNING

To avoid fire, DO NOT 

use with a flammable or 

combustible liquid to clean 

floor.

WARNING

To avoid electric shock, 

DO NOT expose to 

rain.  

Store Indoors.  

– 3 –

The following safetly alert terms are used throughout this 

manual as indicated in their description:

WARNING:

 To warn of hazards or unsafe practices which 

could result in severe personal injury or death.

FOR SAFETY:

 To identify actions which must be followed 

for safe operation of equipment.

The following information signal potentially dangerous 

conditions to the operator or equipment:

FOR SAFETY:

 

1) Do not operate machine:

 

    - unless trained and authorized

 

    - unless operator manual is read and understood

 

    - inflammable or explosive areas

 

    - unless cord is properly grounded

 

    - with damaged cord or plug

 

    - if not in proper operating condition

 

    - in outdoor areas

 

    - in standing water

 

    - with the use of an extension cord

 

2) Before operating machine:

 

    - make sure all safety devices are in place and    

 

      operate properly

 

3) When using machine:

 

    - do not run machine over cord

 

    - do not pull machine by plug or cord

 

    - do not pull cord around sharp edges or corners

 

    - do not unplug by pulling on cord

 

    - do not stretch cord

 

    - do not handle plug with wet hands

 

    - keep cord away from heated surfaces

 

    - report machine damage or faulty operation    

 

      immediately

 

    - follow mixing and handling instructions on  

 

 

      chemical containers

 

4) Before leaving or servicing machine:

 

    - turn off machine

 

    - unplug cord from wall outlet

 

5) When servicing machine:

 

    - unplug cord from wall outlet

 

    - avoid moving parts (Do not wear loose jackets,  

 

      shirts or sleeves)

 

    - use manufacturer supplied or approved  

 

 

      replacement parts

WARNING: Hazardous Voltage. Shock or 

electrocution can result. Always unplug 

machine before servicing.

WARNING: Flammable materials can cause 

an explosion or fire. Do not use flammable 

materials in tank(s).

WARNING: Flammable materials or reactive 

metals can cause an explosion or fire. Do not 

pick up any of these items and materials.

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for 98150-PF















Reviews: