P
OWERWINCH
24'
C
LASS
R
OPE
A
NCHOR
W
INCH
5
W
IRING THE
U
NIT
WARNINGS
A
LWAYS
disconnect the battery before working on electrical equipment.
A
LWAYS
use the recommended wire size and rated circuit breakers. Failure to use
the furnished and recommended sizes can cause a fire hazard and void warranty.
When routing the wiring, avoid sources of heat.
When routing the wiring, avoid sharp edges that can cut or fray the wire insulation.
1. Locate a suitable location for the
switch. Ensure that there is
adequate room behind the
mounting surface for the switch
and wiring.
2. Cut a 1" x 1 3/4" hole into the
surface.
3. Push the switch into the switch
plate from the back of the plate.
Secure using the threaded
switch boot. Set switch aside.
4. Route
one
R
ED
and one B
LACK
12 awg wire from the anchor to the switch
location. Be sure to allow adequate wiring to make connections, allow the
wire to have some slack when routing. Secure the wires with wire ties.
5. At the winch, attach the new wires to the motor wires using the butt connectors.
Ensure that the crimps are solid and that the wires cannot come loose.
Anchor
Winch
Control
Switch
(D)
(C)
(B)
(A)
15A Circuit Breaker
Battery
Black
12awg
Red
12awg
Black
12awg
Red
12awg
PW24003
6. At the switch position, terminate wire with a 12awg 1/4" female disconnect.
Ensure that the crimp is solid and cannot pull off.
7. Connect the wires to the switch. The R
ED
wire goes to terminal "B" and the
B
LACK
wire goes to terminal "A".
8. Route
one
R
ED
and one B
LACK
12 awg wire from the switch to the battery
location. Be sure to allow adequate wiring to make connections, allow the
wire to have some slack when routing. Secure the wires with wire ties.
9. At the switch position, terminate wire with a 12awg 1/4" female disconnect.
Ensure that the crimp is solid and cannot pull off.
10. Connect the wires to the switch. The R
ED
wire goes to terminal "C" and the
B
LACK
wire goes to terminal "D".
1"
1 3/4"
ANCHOR WINCH
CONTROL
SWITCH
UP
DOWN
POWER
WINCH
#10 Pan Head Screw
(4 plcs)
Switch
Switch Plate
Switch
Boot
PW24002
