Powerwerx PWRbox MINI User Manual Download Page 2

Specifications

Built-in LED Worklight

LED worklight with dedicated on/off button. Works as a 
powerful and portable flashlight.

Built-in Battery Status Voltmeter

Use the built-in voltmeter as a guide to your battery’s status:

Battery Charging

It is recommended that you initially charge your new power 
box battery for 8-12 hours before use. We also recommend 
you fully charge your power box at least once a month to 
maintain the charge. You may safely leave the battery charger 
connected continuously to your power box. After using your 
power box, it is always recommended you recharge the battery 
before storage.

Battery Charger Included

Includes AC-DC battery charger with Anderson Powerpole 
connector. Output 14.6VDC, 2A (CC/CV charge profile for 
LiFePO4 batteries). 

Tips

Never use your power box to jump start a vehicle, as it may 
damage the internal battery.

 Always switch the side red 

power switch to OFF when not in use. Close dust covers on 
the automotive socket, USB charge ports and Powerpole 
connectors when not in use.

We recommend you fully charge your power box at least once 
a month to maintain maximum charge. 

Troubleshooting

Unit will not turn ON

• Check 

And replace the internal ATO blade battery fuse with 

the same (20A or 30A) ATO fuse if needed, retry.

•  Recharge battery until resting voltage is at least 13.4V.

Red breaker switch trips OFF

•  Reduce current draw going through 12V cigarette socket to 

less than 14 amps total, retry.

•  Unplug all devices, turn red rocker switch OFF, then ON. 

Now, try plugging in your devices.

Optional Accessories

PWRbox-10

PWRbox-15

Battery Capacity

10 Amp Hours

15 Amp Hours

Battery Chemistry

LiFePO4 (Lithium Iron Phosphate)

Battery Protection

20 Amp Inline Fuse

30 Amp Inline Fuse

Max Current (Auto Socket)

15 Amps

15 Amps

Max Current (Combined)

20 Amps

25 Amps

Nominal Voltage

12 Volts

Charging Voltage

14.6 Volts (CC/CV charge profile for LiFePO4 batteries)

Dual USB Outputs

Up to 2.6A @ 5V USB device charging. Supports QuickCharge QC3.0, QC2.0, BC1.2, Apple, 
Samsung Adaptive Fast Charge Protocol (AFC) and Huawei Fast Charging Protocol (FCP)

Operating Temperature

14°F to 140°F (-10°C to 60°C)

Exterior Dimensions

10.75 in. L x 8.9 in. W x 4.5 in. H (273 mm x 226 mm x 114 mm)

Weight

5.4 lbs. (2.5 kg)

7.0 lbs. (3.2 kg)

14.5 ~ 13.3V

100% ~ 80%

Full Battery Level/Charged

13.2 ~ 12.5V

75% ~ 45%

Medium Battery Level

12.4 ~ 11.5V

40% ~ 10%

Low Battery Level/Recharge

Folding 60W Solar Panel

SKU: FSP-60W

Solar Charge Controller

SKU: MPPT-150-14.6

SAE to Powerpole Adapter

SKU: Bullet-2-PP

PWRbox MINI · Rev 3/2022

Reviews: