Powerwerks PW6EFX, Owner'S Manual

Page: 3 / 4

Here are some examples for setting up the PW6EFX to enhance your live sound.
HOOKUP DIAGRAM
Accepted Inputs
Mic XLR Balanced, Line Level 1/4"
Unbalanced
Normal Line Level of -10dbV
Frequency Response 48Hz to 23kHz Channel volume set at 3/4 full scale
Signal to Noise Ratio 74 db
All controls set at maximum, Output set at
maximum, unclipped level, Bandwidth 22k
21 db Line input to master output
38 db MIC input to master output
Low Boost/Cut +- 9.8 db @ 63Hz
High Boost / Cut +- 7.0 db @ 8.0 Hz
IN: Accepts a pre-master volume
signal from another PowerWerks
device equipped with the
PowerLink feature, or a line-level
input from another audio product.
OUT: Exports a pre-master volume
signal to another PowerWerks
product equipped with the
PowerLink feature.
Phantom Power 18V DC Available on all XLR MIC inputs
Power Requirements 18V DC Wall Power Adaptor Included
Product Weights &
Dimensions
Weight 3.5 lbs. (Including power
supply)
Dimensions: 12" W x 2.5' H x 8" D
PW6EFX Specifications
System Gain
Channel EQ (High /
Low)
2.6k and above,
0.9kHz and below
Power Link
Recommended use: Daisy- changing to other
PowerWerks products with the PowerLink
feature. When PowerWerks products are
linked using the PowerLink feature, the
channels from all linked units will send signal
to all PowerWerks products. Meaning if two
PW6EFX units were linked together, the sum
of all channels (12 in this example) are linked
together to create a 12-channel mixing system.