background image

IMPORTANT SAFETY INSTRUCTIONS 

Danger 
Exposure to extremely high noise levels may cause a 
permanent hearing loss. Individuals vary considerably to noise 
induced hearing loss but nearly everyone will lose some 
hearing if exposed to sufficiently intense noise for a sufficient 
time.  

The U.S. Government's Occupational Safety and Health 
Administration (OSHA) has specified the following 
permissible noise level exposures: 

DURATION PER DAY (HOURS)  8      6       4     3      2        1        
SOUND LEVEL (dB)                     90    93     95   97   100   103    

According to OSHA, any exposure in the above permissible 
limits could result in some hearing loss. Earplugs or protectors 
in the ear canal or over the ears must be worn when operating 
this amplification system in order to prevent a permanent 
hearing loss. If exposure in excess of the limits as put forth 
above, to insure against potentially harmful exposure to high 
sound pressure levels, it is recommended that all persons 
exposed to equipment capable of inducing high sound pressure 
levels, such as this amplification system, be protected by 
hearing protectors while this unit is in operation.      

THIS SYMBOL IS INTENDED TO ALERT THE 
USER TO THE PRESENCE OF NON-INSULATED  
"DANGEROUS VOLTAGE" WITHIN THE 
PRODUCT'S ENCLOSURE THAT MAY BE OF 
SUFFICIENT MAGNITUDE TO CONSTITUTE A 
RISK OF ELECTRIC SHOCK TO PERSONS. 

THIS SYMBOL IS INTENDED TO ALERT THE 
USER TO THE PRESENCE OF IMPORTANT 
OPERATING AND MAINTENANCE 
(SERVICING) INSTRUCTIONS IN THE 
LITERATURE ACCOMPANYING THE UNIT. 

APPARATUS SHALL NOT BE EXPOSED TO 
DRIPPING OR SPLASHING AND THAT NO 
OBJECTS FILLED WITH LIQUIDS, SUCH AS 
VASES, SHALL BE PLACED ON THE 
APPARATUS. 

1.  Read all safety and operating instructions before 

using this product. 

2.  All safety and operating instructions should be kept 

for future reference. 

3.  Read and understand all warnings listed on the 

operating instructions. 

4.  Follow all operating instructions to operate this 

product. 

5.  This product should not be used near water, i.e. 

Bathtub, sink, swimming pool, wet basement, etc. 

6.  Only use dry cloth to clean this product. 
7.  Do not block any ventilation openings, It should not 

be placed flat against a wall or placed in a built-in 
enclosure that will impede the flow of cooling air. 

8.  Do not install this product near any heat sources; 

such as, radiators, heat registers, stove or other 
apparatus (including heat producing amplifiers) that 
produce heat. 

9.  Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding-type plug 
has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your 
safety if the provided plug does not fit into your 
outlet, consult an electrician for replacement of the 
obsolete outlet. 

10.  Protect the power cord being walked on or pinched, 

particularly at Plugs, convenience receptacles and the 
point where they exit from the 
apparatus. Do not break the 
ground pin of the power supply 
cord.

11.  Only use attachments specified by 

the manufacturer. 

12.  Use only with the cart, stand, tripod, bracket, or table 

specified by the manufacturer or sold with the 
apparatus. When a cart is used, use caution when 
moving cart/apparatus combination to avoid injury 
from tip-over. 

13.  Unplug this apparatus during lightning storms or 

when unused for long periods of time. 

14.  Care should be taken so that objects do not fall and 

liquids are not spilled into the unit through the 
ventilation ports or any other openings. 

15.  Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way; such as, power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate 
normally or has been dropped. 

16.  WARNING: To reduce the risk of fire or electric 

shock, do not expose this apparatus to rain or 
moisture. 

17.  When the MAINS plug, or an appliance coupler is 

used as the disconnect device, the disconnect device 
shall remain readily operable. 

18.  Protective Ground Terminal: The apparatus shall be 

connected to an AC main socket with a protective 
earth ground connection. 

Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan

Apparatet må tilkoples jordet stikkontakt

Apparaten skall anslutas till jordat uttag

Apparatets stikprop skal tilsluttes en stikkontakt med jord,
som giver forbindelse til stikproppens jord.

Summary of Contents for PW2X6BT
















Reviews: