Output Power 1%
1 x 50W
1 x 8 ohm load
CH 1-4
Mic XLR Balanced, Line Level 1/4" Unbalanced
Aux
1/8" Line Level or Bluetooth Device (PW4X6BT models)
Frequency Response
20Hz-20kHz
Actual Response is tailored to speaker cabinet for accurate
acou
stical resp
onse
-46dB
Residual Noise, all level controls 0% (minimum)
-37dB
Nominal System Noise, all level controls at 50%
+49dB
Mic to Speaker Output (CH1 - CH4)
+35dB
Line to Speaker Output (CH1 - CH4)
+25dB
Aux to Speaker Output
Channel EQ (high, low)
Treble-10kHz, Bass-100Hz
POWERLINK (IN and OUT)
Both Jacks accept a balanced input and send a pre-master
volume output mix of channels. Recommended use: Linking
two PW4X6 units.
Subwoofer Out
Line Out
20Hz-150Hz
Phantom Power
+15 V
Mic Inputs (CH 1-4)
USA /Canada
120VAC/60Hz, 100W nominal/160W with ext cabinet
Europe
230VAC/50Hz, 100W nominal/160Wwith ext cabinet
UK
230VAC/50Hz, 100W nominal/160W with ext cabinet
Australia
240VAC/50Hz, 100W nominal/160W with ext cabinet
Japan
100VAC/50-60Hz, 100W nominal/160W with ext cabinet
Speakers
Two 6"
30W 16 ohm each
Horn
5 3/4" piezo horn
Power Capacity
50W
RMS 100W with extension cabinet
60Hz-20kHz
Full Range (subwoofer jack not used)
150Hz-20kHz
Crossover
Activ
e (1/4" mono plug in subwoofer jack)
Nominal Impedance
8 ohms
4 ohms with extension cabinet
Bluetooth Module Features
Bluetooth 3.0+EDR compliant. T2dBm Class 2 output
power. Audio DAC:94dB SNR. A2DP pro
fi
le support
cm/kg
25.3 W x 59 H x 23.1 D / 10.38kg
Inches/Pounds
10" W x 23.2" H x 9.1" D / 22.9 lbs
cm/kg
25.3 W x 59 H x 23.1 D / 7.6 kg
Inches/Pounds
10" W x 23.2" H x 9.1" D / 16.7 lbs
PW4X6EX Dimensions & Weight
PW4X6 & PW4X6BT Specifications
System Gain/Speaker Output
(measurement made at 1kHz)
Power Requirements
Frequency Response
PW4X6 & PW4X6BT Dimensions
& Weight
Hum & Noise
Accepted Inputs
