4
Section
GENERAL DESCRIPTION
1-1. INTRODUCTION
This manual contains information and procedures for installation, operation, and maintenance of
Powerwave’s model NTGS86AA single channel power amplifier (SCPA). The manual is organized
into six sections as follows:
Section 1. General Description
Section 2. Installation
Section 3. Operating Instructions
Section 4. Principles of Operation
Section 5. Maintenance
Section 6: Troubleshooting
1-2. GENERAL DESCRIPTION
The NTGS86AA is a linear, single-channel power amplifier that operates in the 25 MHz frequency
band from 869 MHz to 894 MHz. It is designed as a self-contained module with EMI containment
for use in both an indoor and outdoor North American Cellular Base Stations. Its flat base plate
allows for mounting on a flat thermal-absorbing surface to provide adequate heat dissipation,
thereby avoiding the use of any built-in fans.
Each amplifier module has a power, alarm, and control connector that allows the host system to
monitor the amplifier module performance. Primary power for the amplifier is +26 Vdc.
1-3. FUNCTIONAL AND PHYSICAL SPECIFICATIONS
Functional and physical specifications for the amplifier are listed in table 1-1.
1
