Power Fault
Indicator
Status
Indicator
Normal Operation
Condition
The circuit breaker (black button on the side
of the NetSurge) may have tripped. if the
circuit breaker is protuding, unplug the
equipment from the unit and reset the circuit
breaker. Ensure that the total load
does not exceed 15.
If the circuit breaker does not reset and the
status indicator remains off, the NetSurge
protector has been damaged by the overload
condition.
The wall outlet may be incorrectly wired
and/or have a poor ground connection.
Have a qualified electrician check the
outlet wiring.
Diagnostics
The NetSurge protector has two indicators that provide diagnostic information:
the Power Fault and Status indicator.
