5
EN
Step 4: Disable/Enable ROO/RPO function
Contact open:
UPS shuts down.
Contact closed:
UPS start-up (UPS is connected to AC
power and AC power is available).
Note:
The local ON/OFF control by pressing On/Off
button overrides the remote-control function.
Contact open:
UPS shuts down and Fault LED (3) will
be ON.
To return to normal operation, de-activate external
remote contact (Fault LED (3) will be OFF) and restart
the UPS by pressing button.
Step 5: Turn on/off the UPS
Press the ON/OFF button on the front panel for two seconds to power on the UPS.
Step 6: Install software
For optimal computer system protection, install UPS monitoring software to fully configure UPS
shutdown. You may insert provided CD into CD-ROM to install the monitoring software. If not,
please follow steps below to download and install monitoring software from the internet:
1. Go to the website
http://www.power-software-download.com
2. Click ViewPower software icon and then choose your required OS to download the software.
3. Follow the on-screen instructions to install the software.
4. When your computer restarts, the monitoring software will appear as an orange plug icon
located in the system tray, near the clock.
