background image

5

GTS Series Uninterruptible Power Manager

1.0 INTRODUCTION

Thank You
Choosing a power quality solution for your sensitive equipment can 

be a daunting task. That’s especially true when it comes to selecting a 

product that delivers uninterruptible power, since there are so many on 

the market from which to choose. Everyone at POWERVAR thanks you 

for selecting a POWERVAR power quality solution for your application. 

We understand that your decision was a careful one and that your 

purchase of a POWERVAR product is an expression of confidence in our 

company. We promise to always work our hardest to make certain that 

your confidence in our products and our company is well deserved.

Thank You!

The GTS product you have purchased is the most advanced solution 

available today. It does so much more than provide backup power for 

your application. In fact, it’s so advanced that it actually serves as a 

comprehensive management interface between your computer system 

and its supply of electrical power. That’s why we refer to the GTS as an 

Uninterruptible Power Manager or UPM.

We’ve prepared this document to help familiarize you with the functions 

and controls of the GTS Series UPM family. If, after reviewing this 

manual, you have any questions at all, please feel free to contact us by 

phone (1-800-369-7179) or email us at [email protected]

Registering your UPM Purchase
Please take a few moments to register your product purchase. 

Registration is quick and easy via the product registration page found on 

our website at www.powervar.com.

Summary of Contents for ABCEG251







































Reviews: