background image

English

8

Warning label 

Always remove dirt or mud to make the indications legible.

The following alarm labels are attached.

Alarm label 

Read operation manual thoroughly. 

Make sure you read the operation manual thoroughly prior to use.

Wear personal protective equipment

Wear protectors such as hat, safety glasses, ear plugs during work. 

Prohibition of fire 

Don't put a naked flame close to a place where supplying fuel or
doing maintenance. 

Cautions for exhaust gas

Take care not to breathe in exhaust gas from the engine.

Cautions for high temperatures

Muffler of engine, fin of cylinder, etc. are at high temperatures. Don't
touch them.

Caution for electrical shock

There is danger of electric shock during operation, so do not touch
the spark plug.

Caution for avoiding to be injury the finger

Don't hold under the chemical tank. Need to hold up side position of
the chemical tank.

English

7

⑬Nozzle

⑫Ball cock

⑥Chest strap

④Drain

⑨Throttle lever

⑦Adjuster lever

⑩Stop switch

⑧Waist

stabilizer

⑤Knapsack

strap

⑪Starter knob

②Chemical tank lid

①Chemical tank

⑦Adjuster lever

③Fuel tank

2. Name of each part and function

Name of each part and function

Function of each part

Chemical tank

Contain about 25 lit of chemicals.

Chemical tank lid

Fuel tank

Contain about 0.8 lit of fuel.

Drain

Extract chemicals here. 

Knapsack strap

Chest strap

Adjuster lever

Adjusting the position of waist stabilizer.

Waist stabilizer

Hold the waist.

Throttle lever

Control engine speed.

Stop switch

Stop the engine.

Starter knob

Start the engine.

Ball cock

Opening the cock for spraying.

Nozzle

When opening ball cock, chemicals will

be sprayed from nozzle in a mist.

Summary of Contents for BRUMS0735W











Reviews: