─
9
─
5-10cm above
Ground
CORRECT
Cutting with Nylon Trimmer Line
・
The tip of the line does the cutting. The line should
stay extended while cutting.
・
Do not force the line into the material. Forcing the
line will cause it to slap against the material,
increasing line usage and causing poor cutting
results.
Trimming
Hold the bottom of the trimmer head about 5-10cm
above the ground and at an angle. Allow only the
tip of the line to make contact.
Scaling
To remove unwanted vegetation, hold the
trimmer head about 5-10cm above the
ground and at an angle. Allow the tip of the
line to strike the ground cutting the vegetation
off at the surface.
Mowing
Keep the line parallel to the ground and use a
gentle side-to-side motion.
5-10cm above
Ground
INCORRECT
5-10cm above
Ground
