background image

11

4. Charging devices from mini-g via USB out port 2A

•  Turn the mini-g on by holding down the on/off button (4) for 3 seconds.

•  Select the micro USB to USB cable (8) or your devices’ own USB sync/charging cable.

•  The mini-g will stop charging once the device is fully charged.

5. Permanent USB on mode (‘88’ setting)

•  This feature is used if the USB device draws only a small amount of power.

•  Disconnect all cables from the USB and DC out sockets.

•  Turn the mini-g on by holding down the on/off button (4) for 3 seconds.

•  Tap on/off button (4) until the ‘88’ function is shown on the LCD screen (5). 

•  The backlight will remain on while this feature is enabled. 

•  You may now connect your device to either of the USB ports (2).

•  While this feature is in use, the DC out will output at 12V.

•  You can simply press the on/off button (4) again to disable this feature.

6. Permanent DC on mode

•  This feature is used if the DC device draws only a small amount of power.

•  Turn the mini-g on by holding down the on/off button (4) for 3 seconds.

•  Select the correct DC voltage for your device by tapping the on/off button (4) until desired voltage is 

shown.

•  Press the on/off button (4) twice in quick succession.

•  The LCD screen will illuminate and on until the mini-g is manually turned off. 

Summary of Contents for MINI-G
















Reviews: