6
When the controller detects only Battery #1, all power will be sent to battery #1
automatically.
3.
3
rd
LED is for charging frequency.
Setting
PWM Charging frequency
0
25Hz (pre-set)
1
50Hz
2
100Hz
TROUBLESHOOTING
1.
LED flash (multiple flashes per second):
Short circuit; check the solar panel and battery to make sure they are
corrected properly
2.
LED flash (1 flash per second):
Fully charged
3.
LED ON:
Charging
4.
LED flash (1 flash every 3 seconds):
Battery connected, no charge current
5.
LED OFF:
No connection or over voltage
Summary of Contents for MP-3760
Page 8: ...7 MECHANICAL DRAWING ...