PowerTech MB3906, User Manual

Page: 16 / 24

13
OR MODES (14.5V 0.9 A / 14.7V 0.9A):
OR MODES (14.5V 4.0 A / 14.7V 4.0A):
This mode is suitable for charging 12 V lead-acid batteries with a capacity
less than 12 Ah.
Press the MODE selection button to select MODE or .
After doing so, the corresponding LCD display or lights up.
Then if you do not take any further action, the electronic system will
automatically start the charging process together with the LCD display will
flash at (with a current of) 0.9A. If the process runs without any problems,
the LCD display will show the battery charging (bars will start flashing) until
the battery is charged. When the battery is fully charged, the battery icon
should be full and will stop flashing. The device now switches automatically
into maintenance charging mode.
This mode is mainly suitable for charging 12 V lead-acid batteries with a
capacity greater than 12 Ah.
Press the MODE selection button to select MODE or .
After doing so, the corresponding LCD display or lights up.
Then if you do not take any further action, the electronic system will
automatically start the charging process together with the LCD display will
flash at (with a current of) 4.0A. If the process runs without any problems,
the LCD display will show the battery charging (bars will start flashing) until
the battery is charged. When the battery is fully charged, the battery icon
should be full and will stop flashing. The device now switches automatically
into maintenance charging mode.